1-800-772-8800Toll Free
ADA-compliant railing on a ramp
ADA-COMPLIANT RAILING

ADA RAILING SYSTEMS

Railing systems engineered to meet ADA Standards for Accessible Design — graspability, continuity, and structural requirements for ramps, stairs, and accessible routes.

ADA
Section 505 Compliant
1¼"–2"
Graspable Diameter Range
34"–38"
Required Handrail Height
USA
Made in America
0 projects

BUILT TO ADA. BUILT TO LAST.

ADA railing systems are not just about compliance — they are about creating safe, accessible environments that work for everyone. The ADA Standards for Accessible Design specify precise requirements for handrail height, graspability, extension length, and structural continuity that standard railing products often miss.

Hollaender's Speed-Rail® fitting system provides a direct path to ADA compliance. The slip-on pipe fitting approach makes it straightforward to achieve the required 1-1/4" to 2" outside diameter graspable profile, continuous top rail without interruption at post supports, and required 12" horizontal extensions at ramp tops and stair landings.

Every ADA railing installation can be configured from the same Speed-Rail® fitting catalog — no specialty components required. Aluminum pipe gives you the corrosion resistance and low maintenance demand that accessible facilities require.

ADA railing detail on accessible ramp

KEY FITTINGS FOR ADA RAILING

Every ADA-compliant configuration is built from the standard Speed-Rail® catalog — continuous top rails, code-required extensions, and compliant terminations with no specialty components.

Single Socket Tee — Fitting #15

Most Used

The standard post-to-rail connection fitting. Creates a continuous top rail by running pipe through a tee at each post location — meeting ADA's continuity requirement.

Single Socket Elbow — Fitting #11

90° corner fitting for top rail direction changes. Used at landings and returns to maintain the graspable profile through corners.

Wall Return Flange — Fitting #65

ADA requires handrail ends to return to the wall or post. Mounts flush and accepts a single pipe end for compliant terminations at stair tops and ramp landings.

Floor Flange — Fitting #70

Post Mount

Bolt-down base flange for anchoring upright posts at precise ADA heights. Pre-drilled for four anchor bolts, compatible with concrete, steel, and wood substrates.

FEATURES & BENEFITS

Graspable profile — ADA Section 505.7 requires a graspable cross-section. Standard IPS pipe in the 1" to 1-1/2" size range meets this requirement directly when used with Speed-Rail® slip-on fittings

Continuous top rail without interruption — Section 505.3 requires handrails continuous for the full length of the stair flight or ramp run; Speed-Rail® post connections do not interrupt the top rail

Required extensions at top and bottom — 12" horizontal extensions at ramp tops and stair-bottom extensions equal to one tread depth, executed with standard return fittings and wall flanges

34" to 38" height compliance — post height is set during installation; floor flanges anchor posts at any height, so you cut pipe to dimension and set screw

Corrosion-resistant aluminum construction — Aluminum-Magnesium Alloy 535 fittings with aluminum pipe deliver decades of service with no painting, galvanizing, or rust treatment

Reconfigurable for facility changes — as accessible routes evolve, Speed-Rail® structures can be disassembled and reconfigured without new components

No welding or specialty fabrication — slip-on fittings assemble with a hex key, so installation needs no certified welders or hot-work permits

Made in America — cast and machined in Cincinnati, Ohio

TECHNICAL DOCUMENTATION

READY TO BUILD ADA-COMPLIANT RAILING?

Our team can provide fitting selection, configuration guidance, load data, and full project support from design through delivery.