
NU-RAIL®
The offset-design fitting system engineered to minimize cuts. Nu-Rail® lets multiple pipes cross at a single fitting — fewer cuts, faster builds, stronger structures.
OFFSET DESIGN. FEWER CUTS. FASTER BUILDS.
Nu-Rail® is Hollaender's heavier-duty structural slip-on fitting system, distinguished by its offset design that allows multiple pieces of pipe to cross at a single connection point. Where standard in-line fittings require multiple cuts, Nu-Rail® accommodates pipe crossings naturally — reducing the number of field cuts needed and making complex multi-pipe structures faster to assemble.
Like all Hollaender® fittings, Nu-Rail® is cast from Aluminum-Magnesium Alloy 535 — the most corrosion-resistant aluminum alloy available — and features proprietary set screws with tremendous slip and loosening resistance. Compatible with aluminum, galvanized, stainless and carbon steel, the system works with the IPS pipe that best suits your environment and budget.
Available in pipe sizes from 3/4" through 2" IPS, Nu-Rail® is widely used in industrial guardrail, architectural handrail, racking systems, retail display and store fixtures, and anywhere a strong, reconfigurable multi-pipe structure is required.

KEY NU-RAIL® FITTINGS
The offset and adjustable crosses are what define the system — they let pipes intersect at a single fitting with no alignment cuts.
Nu-Rail® Offset Cross — Fitting No. 10
Signature FittingThe defining fitting of the Nu-Rail® system, designed by Pete Hollaender in the 1940s. The offset barrel design allows two pipes to each pass through the fitting at 90° with no cutting and no alignment cuts needed. Available 3/4" through 2" IPS.
Nu-Rail® Adjustable Cross — Fitting No. 30
Two-piece adjustable cross (30A + 30B) that lets pipes cross at any angle. The swivel body locks at the required angle with set screws. Available 3/4" through 2" IPS — ideal for guardrail stairs and ramps.
Nu-Rail® Modified Cross — Fitting No. 30A
The fixed-body half of the Nu-Rail® cross assembly. Used standalone when a fixed-angle four-way crossing is needed. Available 3/4" through 2" IPS.
Nu-Rail® Swivel — Fitting No. 30B
The rotating swivel component that pairs with Fitting No. 30A to create the full adjustable Nu-Rail® cross. Locks at any angle to accommodate non-orthogonal pipe crossings.
FEATURES & BENEFITS
Offset design minimizes field cuts — the offset geometry lets multiple pipes cross at one fitting, meaning faster assembly, less material waste, and stronger finished structures
Heavier-duty structural performance — the right choice for applications that demand greater load capacity at connection points
Compatible with aluminum, galvanized, stainless and carbon steel — specify the IPS pipe material that suits your environment and budget without changing the fitting
Aluminum-Magnesium Alloy 535 casting resists corrosion in harsh environments including marine, chemical, and outdoor exposures
Proprietary set screws with tremendous slip and loosening resistance
Fully reconfigurable — structures disassemble, move, and rebuild as needs change, with no welding, no grinding, and no wasted material
Full range from 3/4" to 2" IPS across five standard pipe sizes
Made in America — cast and machined in Cincinnati, Ohio
OFFSET DESIGN. FEWER CUTS. FASTER BUILDS.
Nu-Rail® is Hollaender's heavier-duty structural slip-on fitting system, distinguished by its offset design that allows multiple pieces of pipe to cross at a single connection point. Where standard in-line fittings require multiple cuts, Nu-Rail® accommodates pipe crossings naturally — reducing the number of field cuts needed and making complex multi-pipe structures faster to assemble.
Like all Hollaender® fittings, Nu-Rail® is cast from Aluminum-Magnesium Alloy 535 — the most corrosion-resistant aluminum alloy available — and features proprietary set screws with tremendous slip and loosening resistance. Compatible with aluminum, galvanized, stainless and carbon steel, the system works with the IPS pipe that best suits your environment and budget.
Available in pipe sizes from 3/4" through 2" IPS, Nu-Rail® is widely used in industrial guardrail, architectural handrail, racking systems, retail display and store fixtures, and anywhere a strong, reconfigurable multi-pipe structure is required.

KEY NU-RAIL® FITTINGS
The offset and adjustable crosses are what define the system — they let pipes intersect at a single fitting with no alignment cuts.
Nu-Rail® Offset Cross — Fitting No. 10
Signature FittingThe defining fitting of the Nu-Rail® system, designed by Pete Hollaender in the 1940s. The offset barrel design allows two pipes to each pass through the fitting at 90° with no cutting and no alignment cuts needed. Available 3/4" through 2" IPS.
Nu-Rail® Adjustable Cross — Fitting No. 30
Two-piece adjustable cross (30A + 30B) that lets pipes cross at any angle. The swivel body locks at the required angle with set screws. Available 3/4" through 2" IPS — ideal for guardrail stairs and ramps.
Nu-Rail® Modified Cross — Fitting No. 30A
The fixed-body half of the Nu-Rail® cross assembly. Used standalone when a fixed-angle four-way crossing is needed. Available 3/4" through 2" IPS.
Nu-Rail® Swivel — Fitting No. 30B
The rotating swivel component that pairs with Fitting No. 30A to create the full adjustable Nu-Rail® cross. Locks at any angle to accommodate non-orthogonal pipe crossings.
FEATURES & BENEFITS
Offset design minimizes field cuts — the offset geometry lets multiple pipes cross at one fitting, meaning faster assembly, less material waste, and stronger finished structures
Heavier-duty structural performance — the right choice for applications that demand greater load capacity at connection points
Compatible with aluminum, galvanized, stainless and carbon steel — specify the IPS pipe material that suits your environment and budget without changing the fitting
Aluminum-Magnesium Alloy 535 casting resists corrosion in harsh environments including marine, chemical, and outdoor exposures
Proprietary set screws with tremendous slip and loosening resistance
Fully reconfigurable — structures disassemble, move, and rebuild as needs change, with no welding, no grinding, and no wasted material
Full range from 3/4" to 2" IPS across five standard pipe sizes
Made in America — cast and machined in Cincinnati, Ohio
READY TO BUILD WITH NU-RAIL®?
Our team can help you select fittings, size your pipe, and work through multi-pipe connection details for your structure.

